Osram AirZing Pro 5030 UVC Fixture

The Osram AirZing Pro 5030 fixture provides air and surface disinfection through germicidal UVC energy. This simple fixture is easy to install and includes an occupancy sensor shut-off for safety. Fixture includes one G30T8/OF (21080) germicidal UV lamp.

Benefits of the AirZing Pro

• Simple, yet high performance fixture
• Cost effective
• Easy to install
• Generates 253.7nm UV-C light, which is ideal for highly effective disinfection
• Proven technology capable of destroying up to 99.9% of microorganisms at recommended exposures
• 30-second delayed start to enhance operational safety
• Equipped with IR motion sensor technology to shut system down when people are detected entering the UV workspace
• Ozone-free emissions
• 3-year fixture warranty

Application Guidelines for the AirZing Pro

This linear fixture can be ceiling or wall mounted with an installation height measured from the floor between 8 and 13ft (2.5 and 4m). The coverage area of one fixture is 129-161ft2 (12-15m2). The workspace should be clear of people and animals during operation.

To further enhance satefy and run time consistency, here is a list of available timer devices to use with the Osram AirZing™ PRO 5030.

Exposure time to run fixture if the workspace is:

• <86ft2 (<8m2), 30 minutes is recommended
• 86-129ft2 (8-12m2), 45 minutes is recommended
• 129-161ft2 (12-15m2), 60 minutes is recommended

To reduce exposure times or treat larger spaces, additional fixtures may be used. The layout can be adjusted according to interior design. This product is most effective on surfaces directly exposed to the light; soiled surfaces, porous materials or recessed areas may not be disinfected.

Important notes:

• This product should only be installed by a licensed electrician, and safety measures such as interlocking devices, lockouts, timers, safety switches or separating on/off switches for the product from other on/off switches are recommended.
• Although the lamp will operate in standard fluorescent fixtures, it should not be used for general lighting applications.
• This product may degrade certain materials and paint, and can damage plants.
• This product is not suitable for the cleaning, disinfection or sterilization of medical devices.

For further details please refer to the Installation and Safety Manual.

Downloads

OSRAM AirZing Pro Installation and Safety

OSRAM AirZing Pro Spec Sheet

OSRAM AirZing Pro Warranty